Strutture & Soluzioni Libera 76 Tower system
Maxitower 40
LITEC offers one the most complete lines of towers; from the most compact telescopic to the most complex lifters used for high load structures. They are entirely pre-assembled and feature modular ground supports, which combine structural soundness with a simple and elegant design. Many tested and certified products are available to meet your every need.
The Maxitower 40 is a lifter able to carry loads up to 2 tons (4409 lbs). If configured appropriately, it interfaces with all types of LITEC truss sized from 290 to 760 mm (0.95’ to 2.49’).
Basic information
| MT40 | MT40E | |
|---|---|---|
| Maximum tower height | 39.37’ | 29.53’ |
| Lifting system | chain hoist | chain hoist |
| Base module weight with top (excluding sleeve block and legs) | 86 kg (189.6 lbs) | 56 kg (123.5 lbs) |
| Vertical main truss | QL40A / QH40SA | QL40A |
| Compatible trusses (with suitable sleeve block) | FL52/FL76/QL40A/QL52A/RL76A | |
| Base dimensions | 1.97’ x 1.97’ | 1.31’ x 1.31’ |
| Volume | 0.58 m3 (20.48 CF) | 0.24 m3 (8.48 CF) |
| Maximum lifting load capacity | max. 2000 kg (max. 4409 lbs) | max. 2000 kg (max. 4409 lbs) |
Maxitower 40
The MT40 tower is composed of a base, extending stabilizers (covering a maximum floor area of 2.4 x 2.4 m (7.87’ x 7.87’)), a main tower body that extends up to 12 m (39.37’) in height, a top section with pulleys for electric chain hoists, and a modular sleeve block that can be assembled in different ways depending on the application.
Stabilizers, motor supports and other special accessories complete the range.
The MT40 lifter works with all trusses in the QL40A and QH40SA lines. Also available in the MT40E compactbase version, which is particularly useful for fair stands and indoor use.
Maxitower 52
LITEC offers one the most complete lines of towers; from the most compact telescopic to the most complex lifters used for high load structures. They are entirely pre-assembled and feature modular ground supports, which combine structural soundness with a simple and elegant design. Many tested and certified products are available to meet your every need.
Carries out high performance lifting. This model also comes in a compact-base Maxitower 52E version suitable for indoor use.
Basic information
| MT52 | MT52E | |
|---|---|---|
| Maximum tower height | 49.21’ | 39.37’ |
| Lifting system | chain hoist | chain hoist |
| Base module weight with top (excluding sleeve block and legs) | 110 kg (242.51 lbs) | 52 kg (114.64 lbs) |
| Vertical main truss | QL52A | QL52A |
| Compatible trusses (with suitable sleeve block) | FL52/FL76/QL40A/QL52A/RL76A | |
| Base dimensions | 2.4’ x 2.4’ | 1.71’ x 1.71’ |
| Volume | 0.84 m3 (29.66 CF) | 0.29 m3 (10.24 CF) |
| Maximum lifting load capacity | max. 3000 kg (6614 lbs) | max. 3000 kg (6614 lbs) |
Maxitower 52
The MT52 tower is composed of a base, extendable stabilizers (covering a maximum floor area of 2.4 x 2.4m (7.87’x7.87’)), a main tower body that extends up to 15m (49.21’) in height, a top section with pulleys for electric chain hoists, and a modular sleeve block that can be assembled in different ways depending on the application.
The system uses twist-resistant vertical 40 or 52 components, and comes complete with stabilization,
motor coupling, hanging and safety accessories.